r3dwhoop ion 3"
R3DWhoop Ion 3"
Nylon CF Brushless Micro frame kit
A complete micro brushless frame kit.
The ION 3" is a weightless "toothpick class" frame kit, suitable for weightless 1S builds or add power from 2S and above. A pocket-sized 5"!
Includes integrated Nylon CF and TPU parts to make this package a one-stop bundle:
- (1) Base frame
- (1) ZeroGrav Fuselage with ZeroGrav Head
- (1) X-bay, 1S optimized battery mount (2S 8-bay or Roflex Split available as add-on)
- Integrated hardware and FC Soft mounts
-mounts BRUSHLESS motors (3-hole and 4-hole mounting pattern) with clearance up to 3"
propellers!
-supports 14mm micro FPV cameras
-supports 14mm Nano HD Cameras and 25x25mm DVR's
-mounts all standard "Whoop" Flight Controllers.
An optional M2X Add-on kit is available. A protective bay for M2 cameras!
WHEN CHOOSING TALLER MOTORS FOR YOUR ION BUILD, THE R3D BOOSTER IS RECOMMENDED IN ORDER TO MOUNT AN INSTA360 GO CAMERA.
#r3dwhoopion3 #r3dshifters
M2X ION add-on kit
14mm M2 Camera Bay
Convert your ION 2.5" or ION 3" to support any 14mm camera with M2 screws.
Simply replace your ION's native X-plate with the included M2X-plate to add M2 camera support. The M2X kit also comes with a new integrated TPU head, offering greater camera protection with angle adjustability of 0°-60° and depth adjustment.
The M2X Add-on kit includes:
(1) Nylon CF M2X-plate with M2 slider mount.
(1) TPU M2 head for R3D Shifters' fuselages.
(4) M1.2 5mm mounting screws.
Various battery bays fit the M2X Kit, from X-bay (1S) to 8-bay (2S) and even our new X-lock Roflex for Hi-powered builds! Available in Accessories below.
*Kit does not include camera mounting hardware.
*ION frame kits are purchased separately.
R3D Booster
Height boost for fuselage attachments
The R3D Booster is designed to increase the height of any fuselage attachment, such as our mounts for insta360 Go cameras, an extra 8mm.
By sharing the hinge of any R3D Shifters' fuselage, the R3D Booster creates a double hinge arm that boosts your accessory / insta360 Go camera higher up, away from the props and further back closer to the center of the Fuselage. The R3D Booster offers better prop clearance, a more centered CG and increases angle adjustability.
When choosing taller motors for your ION builds, the R3D booster is recommended in order to mount an insta360 Go camera.
The R3D Booster includes:
(1) Booster unit
(1) 10mm M1.4 Screw and nut set
Compatible action camera mounts are available below.
*ION frames, fuselages or camera mounts are not included
*Cameras are not included
|
|
how low can you go?
low profile drones offer a different flight experience featuring better aerodynamics and low center of gravity.
The ion is designed to be as compact and lightweight as possible while mounting up to 75mm props: the ultimate power to weight ratio! |
ZeroGrav FUSELAGE
WEIGHING ONLY 0.36G BY ITSELF AND 0.68G WITH CAMERA MOUNT AND HARDWARE, THE ZEROGRAV FUSELAGE MOUNTS ANY 14MM MICRO CAM WITH ADJUSTABLE CAMERA ANGLE CAPABILITY FROM 15° TO 90°+
THE FLEXIBLE TPU HEAD FITS MULTIPLE LENS SIZES (INCLUDING RUNCAM NANO 3 AND BETAFPV NANO HD). |
|
|
|
X-bay:
|
hd ready
THE ION BASE FRAME IS DESIGNED TO CARRY ANY WHOOP EDITION DVR THANKS TO OUR NEW DESIGN.
The Ion camera bay is designed for a 14mm camera and is fully ready for HD and nano HD cameras. |
|
frame weight
|
ZeroGrav Fuselage and head
|