R3dwhoop Zerograv 75 inverted
R3DWhoop ZeroGrav 75 inverted
75MM BRUSHLESS PUSHER FRAME KIT
A complete BRUSHLESS 75mm frame kit.
Includes integrated Nylon CF and TPU parts to make this package a one-stop bundle:
- (1)Base frame and (4)motor mounts
- (1)ZeroGrav Fuselage and ZeroGrav Head XL
- (1)8-bay 2S optimzed battery mount (1S X-bay available as add-on)
- Integrated hardware and FC Soft mounts
-mounts 3-hole pattern and 4-hole pattern BRUSHLESS motors, suited for 40mm propellers
-supports 14mm micro FPV cameras. Fits AIO Camera/VTX combos. Fits 14mm micro/nano HD cameras and 25x25mm DVR's.
-mounts all standard "Whoop" Flight Controllers.
Please allow a lead time of 2-3 days. Your frame kit will arrive pre-assembled for your convenience.
#r3dwhoopzgi75 #r3dshifters
R3D Go Lite Mount
Weightless mount for Insta360 Go
Designed to integrate seamlessly with our fuselages, the R3D Go lite mount will work with any R3DWhoop model that has a fuselage such as Brushless V2, ZeroGrav, R3DWhoop 4K, ION and Isotope models.
It comes with a longer fuselage screw to replace the existing one on your R3DWhoop of choice and shares the hinge with your FPV camera head. the R3D Go lite is fully angle adjustable.
For ION models, a R3D Booster is recommended for maximum prop clearance.
*Hardware included
*Insta360 Go Camera NOT included
R3D Go Capsule
Protective mount for Insta360 Go
The R3D Go Capsule is a bidirectional, fully inclosed TPU shell for Insta360 Go cameras.
It can be mounted either vertically or horizontally with the camera lens on either side of the mount.
Designed to integrate seamlessly with our fuselages, the R3D Go Capsule mount will work with any R3DWhoop model that has a fuselage such as Brushless V2, ZeroGrav, R3DWhoop 4K, ION and Isotope models.
It comes with a longer fuselage screw to replace the existing one on your R3DWhoop of choice and shares the hinge with your FPV camera head. the R3D Go Capsule is fully angle adjustable.
For ION models, a R3D Booster is recommended for maximum prop clearance.
*Hardware included
*Insta360 Go Camera NOT included
pushing 40... mm prop!
derived from our ZeroGrav 75 frame, the Zerograv 75 Inverted was redesigned from the ground up to be a true pusher.
The motor mounts sit higher to allow for any standard 40mm prop to be fully protected inside the ducts and far above ground. Spec’d for racing and time trials, the base frame of the R3DWhoop ZeroGrav 75 Inverted weighs only 5.27g. |
|
|
|
how low can you go?
low profile drones offer a different flight experience featuring better aerodynamics and low center of gravity.
thanks to our unique camea pod, your micro cam is recessed closer to your whoop fc providing balance. the ducts protect the camera while staying out of view. |
FUSELAGE - lite XL
WEIGHING ONLY 0.36G BY ITSELF AND 0.77G WITH CAMERA MOUNT AND HARDWARE.
THE EXTENDED CAMERA MOUNT FITS ANY STANDARD 14MM MICRO CAMERA AS WELL AS AIO CAMERA/VTX COMBOS AND EVEN 14MM nano HD CAMERAS WITH ADJUSTABLE CAMERA ANGLE CAPABILITY FROM 15° TO 90°+ The FLEXIBLE TPU HEAD FITS MULTIPLE LENS SIZES WHILE THE ZEROGRAV 75 INVERTED BASE FRAME IS DESIGNED TO CARRY ANY 25x25 DVR. YOUR CHOICE BETWEEN 75MM SD RACER AND HD CINEWHOOP |
|
|
|
8-bay:
|
Modular motor mounts
NYLON CF IS VERY HARD TO BREAK. BUT LET'S SAY YOU SOMEHOW MANAGED TO DO SO...
WITH OUR MODULAR MOTOR MOUNTS SIMPLY REPLACE THE PART YOU NEED WITHOUT SCRAPPING THE ENTIRE FRAME OR TRANSPLANTING THE ENTIRE BUILD. FEATURES A UNIQUE MULTI-PATTERN THAT FITS BOTH 3-HOLE AND 4-HOLE PATTERN BRUSHLESS MOTORS. |
|
base frame weight
|
Fuselage with camera mount and hardware
|