accessories
Fuselage and Heads
Sold out
Spare Fuselages and Heads
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
Our low profile fuselages fit our entire R3DWhoop frame line from Brushless to ZeroGrav as well as the Ions. The fuselages are modular units that attache to different camera mounts, respective to their frames, we call "Heads".
The Standard Fuselage alone weighs 0.64g. You can find more information on the product page of each frame kit.
Here you can purchase a spare fuselage with or without a head of your choosing.
*cameras are not included
*hardware only included in the "assembled" options (hinge screw and nut)
M2X ION add-on kit
14mm M2 Camera Bay
Due to popular demand, this item is currently for pre-order only.
Please allow 10-14 days prior to shipping confirmation.
Convert your ION 2.5" or ION 3" to support any 14mm camera with M2 screws.
Simply replace your ION's native X-plate with the included M2X-plate to add M2 camera support. The M2X kit also comes with a new integrated TPU head, offering greater camera protection with angle adjustability of 0°-60° and depth adjustment.
The M2X Add-on kit includes:
(1) Nylon CF M2X-plate with M2 slider mount.
(1) TPU M2 head for R3D Shifters' fuselages.
(4) M1.2 5mm mounting screws.
Various battery bays fit the M2X Kit, from X-bay (1S) to 8-bay (2S) and even our new X-lock Roflex for Hi-powered builds! Available in Accessories below.
*Kit does not include camera mounting hardware.
*ION frame kits are purchased separately.
R3D Booster
Height boost for fuselage attachments
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
The R3D Booster is designed to increase the height of any fuselage attachment, such as our mounts for insta360 Go cameras, an extra 8mm.
By sharing the hinge of any R3D Shifters' fuselage, the R3D Booster creates a double hinge arm that boosts your accessory / insta360 Go camera higher up, away from the props and further back closer to the center of the Fuselage. The R3D Booster offers better prop clearance, a more centered CG and increases angle adjustability.
When choosing taller motors for your ION builds, the R3D booster is recommended in order to mount an insta360 Go camera.
The R3D Booster includes:
(1) Booster unit
(1) 10mm M1.4 Screw and nut set
Compatible action camera mounts are available below.
*ION frames, fuselages or camera mounts are not included
*Cameras are not included
Motor Mounts
Motor Mounts
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
All of our ducted models include replaceable, modular motor mounts. To order a full set of four, enter “4” in quantity.
Choose your model below:
Battery Bays
Micro FPV battery bays
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
X-bay V2 - Fits R3DWhoop ZeroGrav, Ion 2.5", Ion 3", Brushless V2 and Muon
8-bay - A new option for all models supporting X-Bay V2! The 8-bay natively mounts two standard 1S Whoop batteries in series and can fit small 2S batteries in “toilet tank” configuration (it can also be modded to fit small 2S batteries by removing the center dividers). The 8-bay can also be rotated 90 degrees if you wish to natively mount your 1S batteries from port to starboard.
20x20 Roflex - Fits R3D Carbon models as well as any quad frame with a 20x20 mounting format.
X-lock Roflex - NEW! Fits any R3DWhoop model that supports our X-bay (V2) and 8-bay, such as ZeroGrav, Brushless V2, Muon, Ion and Isotope lines.
Split Roflex - Fits any R3DWhoop model.
R3D Web
Sold out
20x20 soft mount
OFFERING A SIMPLE BUT EFFECTIVE MOUNTING SOLUTION FOR YOUR MICRO ELECTRONICS, THE WEB EFFICIENTLY ADDS 20X20MM MOUNTING HOLES TO YOUR PRECIOUS COMPONENTS. IT ALSO SERVES AS A GREAT SOFT MOUNT FOR YOUR FC/ESC STACK.
BetaFPV BEC Board (Hero 6/7)
For GoPro Hero 6/7
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
No need to worry your GoPro will turn off during flight anymore. This BEC board only weighs about 1.5g, which makes your naked GoPro super neat and light. It has integrated 5V@2A BEC, stock GoPro buttons, LED pluggable connectors, and remote recording!
- BEC Board is specially designed for Naked GoPro HERO6/7 which weighs about 1.5g, makes your naked GoPro lighter and easy to install on your drone.
- The BEC output voltage is 5V@2A, prevents accidental of power off which is caused by the insufficient power supply for the FC board.
- Integrated GoPro stock buttons, Power/Mode Button and Record Button.
- Integrated GoPro stock LED, let's you know the status of the camera.
- A pad is available for pilots to control the GoPro recording via the radio transmitter.
- Pluggable connector, allows for easier connection with your flight controller for power supply and recording.
Specification
- Item: BEC Board for Naked Camera
- Weight: 1.53g
- Output: 5V @ 2A
- Input voltage: 2-4S
- Connector: GH 1.25 3P connector
NameLessRC BEC
For GoPro Hero 8
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
Features:
- The NLRC BEC is specially designed for Naked GoPro HERO 8 which weighs about 2.4g, makes your naked GoPro lighter and easier to install on your drone.
- Comes with the pluggable connector, which is easier to connect with your flight controller for power supply and recording.
- Supports 2-6S power in.
- Automatic power-on function.
- Output voltage is 5V@3A, helps avoid accidental power off which is caused by insufficient power supply.
- Both support LED and BUZZER port. Available pad for pilots to control the GoPro recording via the radio transmitter.
- Bypassed the Pinio remap and FC doesn't need to remap.
- Integrated GoPro stock buttons, Power/Mode Button and Record Button
- Integrated GoPro stock LED to know the status of the camera.
Specification
- Weight: 2.4g
- Output: 5V@2.1A
- Input Voltage: 2-6S
- Connector: PH 1.0 3P Connector