Isotope 85 - Preorder
85mm Nylon/CF pusher frame kit
NOTICE: WE'RE TAKING A BREAK FOR THE HOLIDAYS!
ALL ITEMS WILL BE AVAILABLE FOR PRE-ORDER ONLY.
PRE-ORDERS WILL BE FULFILLED IN THE ORDER THEY WERE RECEIVED, STARTING JAN 5TH.
A complete BRUSHLESS 85mm frame kit.
Includes integrated Nylon CF and TPU parts to make this package a one-stop bundle:
- (1) Base Isotope 85 frame (14mm or 20mm camera bay)
- (4) motor mounts
- (1) Fuselage and head
- (1) X-lock Roflex battery bay
- (1) Rear antenna mount
- Integrated hardware and FC Soft mounts
-mounts 3-hole pattern and 4-hole pattern BRUSHLESS motors, suited for 2" propellers.
-supports 14mm or 19mm FPV cameras (M2 screw mounting).
-supports caddx Nebula or DJI digital cameras.
-Integrated Caddx Vista mount.
-supports 25x25mm DVR's.
-mounts all standard "Whoop" Flight Controllers.
-additional 20x20 rear mount on the 20mm frame variant only
Complete your build with a R3D GoPod 6/7 or GoPod 8 action camera mounts.
For the Isotope 85, a 25x25 (Whoop) mounting plate is required.
Please allow a lead time of 2-5 days. Your frame kit will arrive pre-assembled for your convenience.
#r3disotope85 #r3dshifters
ACCESSORIES AND Spares
R3D GoPod 6/7 - Preorder
De-Shelled Action Camera Case
NOTICE: WE'RE TAKING A BREAK FOR THE HOLIDAYS!
ALL ITEMS WILL BE AVAILABLE FOR PRE-ORDER ONLY.
PRE-ORDERS WILL BE FULFILLED IN THE ORDER THEY WERE RECEIVED, STARTING JAN 5TH.
The R3D GoPod 6/7 is a flight ready, protective case for your de-shelled action camera needs.
Designed for Hero 6/7 it features a fully adjustable camera lens tilt of 0°-60° and an integrated soft mounting system.
The GoPod 6/7 is compatible with supported BEC's, offering easy access to the buttons and JST, SD Card slot, monitor port, and HDMI port. Compatible with Mavic 2 Zoom ND filters.
Includes:
(1) GoPod 6/7 hard shell
(1) GoPod 6/7 lens mount
(1) 20x20 / 30x30 OR 25x25(whoop) mounting plate
*Hardware is included
Optional purchase:
(1) BetaFPV BEC Hero 6/7
*De-shelled action camera electronics are NOT included
*ND filter is NOT included
R3D GoPod 8 - PreOrder
De-Shelled Action Camera Case
NOTICE: WE'RE TAKING A BREAK FOR THE HOLIDAYS!
ALL ITEMS WILL BE AVAILABLE FOR PRE-ORDER ONLY.
PRE-ORDERS WILL BE FULFILLED IN THE ORDER THEY WERE RECEIVED, STARTING JAN 5TH.
The R3D GoPod 8 is a flight ready, protective case for your de-shelled action camera needs.
Designed for Hero 8, It features a fully adjustable camera lens tilt of 0°-60° and an integrated soft mounting system.
The GoPod 8 is compatible with supported BEC's, offering easy access to the buttons and JST, SD Card slot and monitor port. Compatible with Mavic 2 Zoom ND filters.
Includes:
(1) GoPod 8 hard shell
(1) GoPod 8 lens mount
(1) 20x20 / 30x30 OR 25x25(whoop) mounting plate
*Hardware is included
Optional purchase:
(1) NameLess RC BEC Hero 8
*De-shelled action camera electronics are NOT included
*ND filter is NOT included
R3D Go Capsule - PreOrder
Protective mount for Insta360 Go
NOTICE: WE'RE TAKING A BREAK FOR THE HOLIDAYS!
ALL ITEMS WILL BE AVAILABLE FOR PRE-ORDER ONLY.
PRE-ORDERS WILL BE FULFILLED IN THE ORDER THEY WERE RECEIVED, STARTING JAN 5TH.
The R3D Go Capsule is a bidirectional, fully enclosed TPU shell for Insta360 Go cameras.
It can be mounted either vertically or horizontally with the camera lens on either side of the mount.
Designed to integrate seamlessly with our fuselages, the R3D Go Capsule mount will work with any R3DWhoop model that has a fuselage such as Brushless V2, ZeroGrav, R3DWhoop 4K, ION and Isotope models.
It comes with a longer fuselage screw to replace the existing one on your R3DWhoop of choice and shares the hinge with your FPV camera head. the R3D Go Capsule is fully angle adjustable.
For ION models, a R3D Booster is recommended for maximum prop clearance.
*Hardware included
*Insta360 Go Camera NOT included
R3D Booster - Preorder
Height boost for fuselage attachments
NOTICE: WE'RE TAKING A BREAK FOR THE HOLIDAYS!
ALL ITEMS WILL BE AVAILABLE FOR PRE-ORDER ONLY.
PRE-ORDERS WILL BE FULFILLED IN THE ORDER THEY WERE RECEIVED, STARTING JAN 5TH.
The R3D Booster is designed to increase the height of any fuselage attachment, such as our mounts for insta360 Go cameras, an extra 8mm.
By sharing the hinge of any R3D Shifters' fuselage, the R3D Booster creates a double hinge arm that boosts your accessory / insta360 Go camera higher up, away from the props and further back closer to the center of the Fuselage. The R3D Booster offers better prop clearance, a more centered CG and increases angle adjustability.
When choosing taller motors for your ION builds, the R3D booster is recommended in order to mount an insta360 Go camera.
The R3D Booster includes:
(1) Booster unit
(1) 10mm M1.4 Screw and nut set
Compatible action camera mounts are available below.
*ION frames, fuselages or camera mounts are not included
*Cameras are not included
R3D Go Lite Mount - Preorder
Weightless mount for Insta360 Go
NOTICE: WE'RE TAKING A BREAK FOR THE HOLIDAYS!
ALL ITEMS WILL BE AVAILABLE FOR PRE-ORDER ONLY.
PRE-ORDERS WILL BE FULFILLED IN THE ORDER THEY WERE RECEIVED, STARTING JAN 5TH.
Designed to integrate seamlessly with our fuselages, the R3D Go lite mount will work with any R3DWhoop model that has a fuselage such as Brushless V2, ZeroGrav, R3DWhoop 4K, ION and Isotope models.
It comes with a longer fuselage screw to replace the existing one on your R3DWhoop of choice and shares the hinge with your FPV camera head. the R3D Go lite is fully angle adjustable.
For ION models, a R3D Booster is recommended for maximum prop clearance.
*Hardware included
*Insta360 Go Camera NOT included
Battery Bays - Preorder
Micro FPV battery bays
NOTICE: WE'RE TAKING A BREAK FOR THE HOLIDAYS!
ALL ITEMS WILL BE AVAILABLE FOR PRE-ORDER ONLY.
PRE-ORDERS WILL BE FULFILLED IN THE ORDER THEY WERE RECEIVED, STARTING JAN 5TH.
X-bay V2 - Fits R3DWhoop ZeroGrav, Ion 2.5", Ion 3", Brushless V2 and Muon
8-bay - A new option for all models supporting X-Bay V2! The 8-bay natively mounts two standard 1S Whoop batteries in series and can fit small 2S batteries in “toilet tank” configuration (it can also be modded to fit small 2S batteries by removing the center dividers). The 8-bay can also be rotated 90 degrees if you wish to natively mount your 1S batteries from port to starboard.
20x20 Roflex - Fits R3D Carbon models as well as any quad frame with a 20x20 mounting format.
X-lock Roflex - NEW! Fits any R3DWhoop model that supports our X-bay (V2) and 8-bay, such as ZeroGrav, Brushless V2, Muon, Ion and Isotope lines.
Split Roflex - Fits any R3DWhoop model.
Motor Mounts - Preorder
Motor Mounts
NOTICE: WE'RE TAKING A BREAK FOR THE HOLIDAYS!
ALL ITEMS WILL BE AVAILABLE FOR PRE-ORDER ONLY.
PRE-ORDERS WILL BE FULFILLED IN THE ORDER THEY WERE RECEIVED, STARTING JAN 5TH.
All of our ducted models include replaceable, modular motor mounts. To order a full set of four, enter “4” in quantity.
Choose your model below:
Fuselage and Heads - Preorder
Spare Fuselages and Heads
NOTICE: WE'RE TAKING A BREAK FOR THE HOLIDAYS!
ALL ITEMS WILL BE AVAILABLE FOR PRE-ORDER ONLY.
PRE-ORDERS WILL BE FULFILLED IN THE ORDER THEY WERE RECEIVED, STARTING JAN 5TH.
Our low profile fuselages fit our entire R3DWhoop frame line from Brushless to ZeroGrav as well as the Ions. The fuselages are modular units that attache to different camera mounts, respective to their frames, we call "Heads".
The Standard Fuselage alone weighs 0.64g. You can find more information on the product page of each frame kit.
Here you can purchase a spare fuselage with or without a head of your choosing.
*cameras are not included
*hardware only included in the "assembled" options (hinge screw and nut)
|
|
|