R3DWhoop Ion - ZeroGrav Edition
Nylon CF Brushless Micro frame kit
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
A complete "toothpick class" micro brushless frame kit.
Derived from our extremely lightweight R3DWhoop ZeroGrav, The ION ZeroGrav Edition is our lightest "toothpick class" frame kit yet, optimized for 1S builds that fly like a 5"!
Includes integrated Nylon CF and TPU parts to make this package a one-stop bundle:
- (1) Base frame
- (1) ZeroGrav Fuselage with ZeroGrav Head
- (1) X-bay, 1S optimized battery mount (2S 8-bay available as add-on)
- Integrated hardware and FC Soft mounts
-mounts BRUSHLESS motors (06xx, 07xx or 08xx or 110X with 3-hole mounting pattern) withclearance up to 65mm propellers!
-supports 14mm micro FPV cameras
-supports 14mm Nano HD Cameras and 25x25mm DVRs
-mounts all standard "Whoop" Flight Controllers.
An optional M2X Add-on kit is available. A protective bay for M2 cameras!
WHEN CHOOSING TALLER MOTORS FOR YOUR ION BUILD, THE R3D BOOSTER IS RECOMMENDED IN ORDER TO MOUNT AN INSTA360 GO CAMERA.
#r3dwhoopionzg #r3dshifters
ACCESSORIES AND SPARES
R3D Go Capsule
Protective mount for Insta360 Go
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
The R3D Go Capsule is a bidirectional, fully enclosed TPU shell for Insta360 Go cameras.
It can be mounted either vertically or horizontally with the camera lens on either side of the mount.
Designed to integrate seamlessly with our fuselages, the R3D Go Capsule mount will work with any R3DWhoop model that has a fuselage such as Brushless V2, ZeroGrav, R3DWhoop 4K, ION and Isotope models.
It comes with a longer fuselage screw to replace the existing one on your R3DWhoop of choice and shares the hinge with your FPV camera head. the R3D Go Capsule is fully angle adjustable.
For ION models, a R3D Booster is recommended for maximum prop clearance.
*Hardware included
*Insta360 Go Camera NOT included
R3D Booster
Height boost for fuselage attachments
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
The R3D Booster is designed to increase the height of any fuselage attachment, such as our mounts for insta360 Go cameras, an extra 8mm.
By sharing the hinge of any R3D Shifters' fuselage, the R3D Booster creates a double hinge arm that boosts your accessory / insta360 Go camera higher up, away from the props and further back closer to the center of the Fuselage. The R3D Booster offers better prop clearance, a more centered CG and increases angle adjustability.
When choosing taller motors for your ION builds, the R3D booster is recommended in order to mount an insta360 Go camera.
The R3D Booster includes:
(1) Booster unit
(1) 10mm M1.4 Screw and nut set
Compatible action camera mounts are available below.
*ION frames, fuselages or camera mounts are not included
*Cameras are not included
M2X ION add-on kit - Pre Order
14mm M2 Camera Bay
Due to popular demand, this item is currently for pre-order only.
Please allow 10-14 days prior to shipping confirmation.
Convert your ION 2.5" or ION 3" to support any 14mm camera with M2 screws.
Simply replace your ION's native X-plate with the included M2X-plate to add M2 camera support. The M2X kit also comes with a new integrated TPU head, offering greater camera protection with angle adjustability of 0°-60° and depth adjustment.
The M2X Add-on kit includes:
(1) Nylon CF M2X-plate with M2 slider mount.
(1) TPU M2 head for R3D Shifters' fuselages.
(4) M1.2 5mm mounting screws.
Various battery bays fit the M2X Kit, from X-bay (1S) to 8-bay (2S) and even our new X-lock Roflex for Hi-powered builds! Available in Accessories below.
*Kit does not include camera mounting hardware.
*ION frame kits are purchased separately.
R3D GoPod 6/7
De-Shelled Action Camera Case
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
The R3D GoPod 6/7 is a flight ready, protective case for your de-shelled action camera needs.
Designed for Hero 6/7 it features a fully adjustable camera lens tilt of 0°-60° and an integrated soft mounting system.
The GoPod 6/7 is compatible with supported BEC's, offering easy access to the buttons and JST, SD Card slot, monitor port, and HDMI port. Compatible with Mavic 2 Zoom ND filters.
Includes:
(1) GoPod 6/7 hard shell
(1) GoPod 6/7 lens mount
(1) 20x20 / 30x30 OR 25x25(whoop) mounting plate
*Hardware is included
Optional purchase:
(1) BetaFPV BEC Hero 6/7
*De-shelled action camera electronics are NOT included
*ND filter is NOT included
R3D GoPod 8
De-Shelled Action Camera Case
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
The R3D GoPod 8 is a flight ready, protective case for your de-shelled action camera needs.
Designed for Hero 8, It features a fully adjustable camera lens tilt of 0°-60° and an integrated soft mounting system.
The GoPod 8 is compatible with supported BEC's, offering easy access to the buttons and JST, SD Card slot and monitor port. Compatible with Mavic 2 Zoom ND filters.
Includes:
(1) GoPod 8 hard shell
(1) GoPod 8 lens mount
(1) 20x20 / 30x30 OR 25x25(whoop) mounting plate
*Hardware is included
Optional purchase:
(1) NameLess RC BEC Hero 8
*De-shelled action camera electronics are NOT included
*ND filter is NOT included
R3D Go Lite Mount
Weightless mount for Insta360 Go
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
Designed to integrate seamlessly with our fuselages, the R3D Go lite mount will work with any R3DWhoop model that has a fuselage such as Brushless V2, ZeroGrav, R3DWhoop 4K, ION and Isotope models.
It comes with a longer fuselage screw to replace the existing one on your R3DWhoop of choice and shares the hinge with your FPV camera head. the R3D Go lite is fully angle adjustable.
For ION models, a R3D Booster is recommended for maximum prop clearance.
*Hardware included
*Insta360 Go Camera NOT included
Battery Bays
Micro FPV battery bays
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
X-bay V2 - Fits R3DWhoop ZeroGrav, Ion 2.5", Ion 3", Brushless V2 and Muon
8-bay - A new option for all models supporting X-Bay V2! The 8-bay natively mounts two standard 1S Whoop batteries in series and can fit small 2S batteries in “toilet tank” configuration (it can also be modded to fit small 2S batteries by removing the center dividers). The 8-bay can also be rotated 90 degrees if you wish to natively mount your 1S batteries from port to starboard.
20x20 Roflex - Fits R3D Carbon models as well as any quad frame with a 20x20 mounting format.
X-lock Roflex - NEW! Fits any R3DWhoop model that supports our X-bay (V2) and 8-bay, such as ZeroGrav, Brushless V2, Muon, Ion and Isotope lines.
Split Roflex - Fits any R3DWhoop model.
Fuselage and Heads
Spare Fuselages and Heads
YOUR ITEMS ARE PRE-ASSEMBLED TO ORDER FOR YOUR CONVENIENCE, PLEASE ALLOW 5-7 DAYS PRIOR TO SHIPMENT CONFIRMATION.
Our low profile fuselages fit our entire R3DWhoop frame line from Brushless to ZeroGrav as well as the Ions. The fuselages are modular units that attache to different camera mounts, respective to their frames, we call "Heads".
The Standard Fuselage alone weighs 0.64g. You can find more information on the product page of each frame kit.
Here you can purchase a spare fuselage with or without a head of your choosing.
*cameras are not included
*hardware only included in the "assembled" options (hinge screw and nut)
|
|
|
|
|
|